The Gatex G160 Standard fiberglass reinforcement mesh is laid on top of an initial layer of smoothing adhesive (min.2-3 mm). The mesh should be unrolled from top to bottom, embedding it with the help of a float (spatula), while taking care to overlap by at least 10 cm and avoiding the formation of folds and bubbles. The process should proceed with a further layer of smoothing adhesive. The bets of the mesh cannot coincide with the joints between the panels. In the case of corner holes in the walls (e.g. windows) should sink further cuts diagonally across the grid with dimensions of about 20×30 cm
Material: Glass fibre, with alkali-resistant and fibre-fixing coating.
Length: 50 m (±1%)
Width: 100 cm (±1%)
Nominal mesh size (MD/CMD – warp/weft): (3,8 × 4,8) ±0,5 mm
Mass per unit area: 160 g/m2 (±5%)
Organic content: 20% (±4%)
Average tensile strength (MD/CMD – warp/weft): 1750 N/5 cm / 1900 N/5 cm Elongation (MD/CMD – warp/weft): < 4,5% / < 4,5%
Average tensile strength after ageing (MD/CMD – warp/weft): > 2000 N/5 cm / > 2000 N/5 cm; min 50% / min 50%
Elongation after ageing (MD/CMD – warp/weft): 3,5 % / < 3,5 %
Average calorific value: 6,61 MJ/kg; 1,05 MJ/m2
Thickness: 0,43 (±0,02) mm
Reaction to fire: NPD
Certification: ETAG 004, TÜV Nord
Relevant technical specification: EAD 040016-00-0404
Available colors: white, orange, yellow, red, blue, green.
Standard roll size: 1 m × 50 m
Number of rolls per pallet: 30